====== Path ======

In the data sheet below, you can set whether the last section of the device's movement is marked by a trail on the map.

{{ en:software:desktop:manual:trail.png?800&direct |}}

**Show path**

Turn the route display on or off.

**Path length**

In case of display, how long the trail should be. By trail length we mean the number of points from which GPS position data was received.

**Path point information**

It also displays GPS data transfer points on the trail drawn after the device.

** Path only on the move **

The trail should only be visible when the device is in motion, or even if the device is stationary, the map should show the last section spent in motion.