The device can be used after inserting a SIM card, inserting it in a car and then setting it up via SMS or a mobile phone or PC application. Once turned on, the GPS receiver and SIM card will automatically connect to the GPS and GSM networks (if available) and begin collecting position data, which can be queried using SMS or an Internet application.

To use the features of your device, you need a SIM card, similar to a mobile phone. The device communicates with the mobile service provider's network via SIM card, SMS or mobile phone or PC applications. After inserting the SIM card and charging the battery, you can make the necessary settings by sending an application or SMS (eg entering the device ID name, frequency of sending GPS position data, etc.).

When switched on

• The device continuously registers position data, which can be queried with SMS commands at a limited level.
• If you have a software subscription, the device sends the position data to the software service center - the processed results (eg map route display, route event list, real-time tracking) - can be viewed in the phone or computer application.

You will find detailed information on the installation, use, maintenance and decommissioning of the device in the following sections of the documentation.