User Tools

Site Tools


en:devices:manufacturers:tkstar:area:car:tk806:manual:method-of-use

How to use


After inserting a SIM card and setting up via SMS or a mobile phone or PC application, the device is connected to the vehicle's electrical system. After switching on, the GPS receiver and the SIM card automatically connect to the GPS and GSM networks (if available) and start collecting position data, which can be queried using SMS or an internet application.

To use the features of your device, you need a SIM card, similar to a mobile phone. The device communicates with the mobile service provider's network via SIM card, SMS or mobile phone or PC applications.

After inserting the SIM card and charging the battery or connecting it to the vehicle, you can make the necessary settings by sending an application or SMS (eg entering the device ID name, frequency of sending GPS position data, etc.).

When switched on

  • The device continuously registers position data, which can be queried with a limited number of SMS commands.
  • If you have a software subscription, the device sends the position data to the software service center - the processed results (eg map route display, route event list, real-time tracking) - can be viewed in the phone or computer application.

The subscription software provided by the distributor for the device greatly expands the range of features of the device. These extensions are only available in the mobile or PC application.

You will find detailed information on the installation, use, maintenance and decommissioning of the device in the following sections of the documentation.

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.