You can use the device after charging, inserting the SIM card, and setting it up via SMS or a mobile phone or PC application. The device automatically connects to the GPS and GSM networks using the GPS receiver and the SIM card (if available) and starts collecting position data, which can be queried using SMS or an Internet application.

The device can be used after setting up and inserting the SIM card via SMS or a mobile phone or PC application. Once turned on, the GPS receiver and SIM card will automatically connect to the GPS and GSM networks (if available) and start collecting position data. You can activate or deactivate various functions via SMS by sending commands to the device or by using an Internet application, and you can receive data from it in the same way.

After inserting the SIM card and charging the battery, you can make the necessary settings by sending an application or SMS (eg entering the device ID name, frequency of sending GPS position data, etc.).

When switched on

• The device continuously registers position data, which can be queried with SMS commands at a limited level.
• If you have a software subscription, the device sends the position data to the software service center - the processed results (eg map route display, route event list, real-time tracking) - can be viewed in the phone or computer application.

The device can also be used as an energy bank to charge other devices or as a lamp.

You will find detailed information on the installation, use, maintenance and decommissioning of the device in the following sections of the documentation.